CPCI Advanced Compute and IO Board

CPCI Advanced Compute and IO Board

CPCI Advanced Compute and IO Board

Advanced Compute & IO Board is high end Microprocessor based Mixed Input & output Board. It is suitable for high speed Data Acquisition, Simulation, ATE applications. This board have digital I/O signals, analog I/O signals, USB, RS232, Ethernet interface and external bus interface. Board is well suitable for special type data acquisition & processing application. Board has high end FPGA which is used for automatic (Programmable) data acquisition and very useful high speed data acquisition. Board is based on CPCI architecture and can be used with CPCI or PXI backplane.


ENQUIRE NOW



Specifications

  • Arm Core Based Processor
  • Shared DPRAM for PCI interface
  • Shared DPRAM for PCI interface
  • Flash Memory
  • ARTIX/KINTEX FPGA - High Speed Logic Device
  • 32 Bit, 33 / 66 MHz bus through cPCI /PXI backplanes
  • Board Dimension is 160mm x 233.35mm
  • Power Requirements: +12V/2.5A, -12V/2.5A and +5V/6A
  • External Bus through Rear IO (16 bit address bus and 16 bit data bus with Control signals)
  • 10/100/1000 MBPS Ethernet
  • 1 Channel RS232 Standard Communication interface
  • 1 Channel SPIL Interface (Standard INMOS link protocol)
  • Ethernet, JTAG, RS232/422, USB connectors, Status Indicators at front side
  • 144 Digital Input / Outputs (TTL Compatible, 18 * 8 Channel Configurable)
  • 16 Analog Outputs (16 Bit, -10 to +10V Range, +/-10mv Accuracy, Settling time is 10us)
  • 64 Analog Inputs (1 MSPS, 16 Bit, -10 to +10V Range, +/-10mv Accuracy) (16 channels can be used either for DAC feedback or for external input), Settling time for multichannel measurement is 3 us interval
  • All IO’s at rear side
  • Data/Communication Simulation /Acquisition of for analog & digital interface
  • 1 Channel Configurable Frequency Ranges from 100Hz to 1MHz
    • Resolution insteps of 0.03Hz, Duty Cycle 50%
    • Amplitude of the Digital Frequency out : Low – 0.4V max, High – 4.8V min
    • Sinusoidal or Square Wave Output (Configurable)

 

Software

  • BSPs and Driver software for Windows XP/7/10 and Linux OS
  • ATP Software

 

Environmental Specifications

  • Operating Temperature: -20 to +65 deg C
  • Storage Temperature: -40 to +85 deg C
  • Humidity: 95% Relative (Non-condensing) @ 40 deg C

 

Cost

    Rs. 7, 87, 500/- Plus applicable Taxes

Related Products


RTM-Sensor-Signal-Conditioning-Board
RTM-Sensor-Signal-Conditioning-Board
Show Details

Quick Contact